Medical consumable sterilization pouch for steam and EO

Specification：

Material：Sterilization flat rolls are constructed from transparent PET/PP composite membrane and medical dialysis  paper ,Process indicators for steam and EO sterilization are applied on the paper surface of the roll. All process indicators are water based and non-toxic inks and provide accurate and clear color change after sterilization process

Application：

Hospital, Dental clinic and laboratory’s sterilization , medical device factory, nail&beauty supply, piercing tattoo supply and family high-temperature etc.

Features：

1. Adopt special double-sided tape to adhesive seal quickly and effectively without professional equipment.

2. Adopt three side explosion-proof technology to prevent burst effectively.

3. With sterilization change-color instructions to show sterilization conditions clearly.

4. See interior items clearly through transparent film.

5.ISO11607 and EN 868,CE Mark is labeled on the transport cartons .

Remark：Load the articles to be sterilized into this article.Tear off the bottom isolation strip, fold inwards along the dotted line and press hard

Sterilization color change：Initial pink turns brown/yellow after  ETO processed

                                      Initial blue turns gray/black after Steam processed

Sterilization method：

Steam sterilization

When using 121°C steam sterilization, the sterilization duration is 20-30 minutes.

When using 132°C steam sterilization, the sterilization time is 4 minutes.

The volume of sterilized items should be between 5% and 80% of the volume of the sterilizer.

Ethylene oxide sterilization:

The ethylene oxide concentration is 800 to 1000 mg / L, and the relative temperature is 55°C to 60°C. When the relative humidity is 60% to 80%, the sterilization duration is 6 hours.